Skip to content Skip to left sidebar Skip to footer

Tag: Webinar

MyEnergy Portal Training Session Registration

Program/s: EmPower+
To: Participating Contractors and Clean Energy Hubs
Summary: MyEnergy Portal Training Session Registration
Contact with Questions: support.residential@nyserda.ny.gov

A training session to familiarize you with the MyEnergy Portal and its recent updates will be held in late July for Regional Clean Energy Hubs. The MyEnergy Portal enables New York State customers to apply and receive rebates for the new Appliance Upgrade Program (AUP), connect with Participating Contractors, Participating Retailers (AUP only), and Regional Clean Energy Hubs.

Training Sessions

  • Regional Clean Energy Hubs
    • Training Session: Wednesday, July 30 from 3:00 to 4:00 p.m. ET (Register Here)

Additional Support: If assistance is needed with the MyEnergy portal please submit the request support form on MyEnergy. A NYSERDA representative will be sent an email on your behalf.

NYSERDA Participating Contractor Heat Pump Training Series II

Program/s: EmPower+, Residential Energy Assessments, Comfort Home
To: Participating Contractors
Summary: NYSERDA Participating Contractor Heat Pump Training Series II
Contact with Questions: max.ciovacco@nyserda.ny.gov 

NYSERDA Heat Pump Training Series 
Fridays 8:00 a.m. – 9:00 a.m. ET 
To register for the series, please click here.

DateSeries #TopicPresenter
04/25/25   4Equipment Selection 1.5hrs TRC – JJ Sawicki 
05/09/25 5Design & Placement TRC – Matt/JJ/Brett
05/23/25 6Ancillary/Miscellaneous –  
Exterior Equipment Placement 
Snow shields 
Condensate lines 
Dehumidification 
Avoiding mold growth in heads 
Manufacturer commissioning checklist 		TRC – Chrissy Thisse 
06/13/25 7Putting it all together TRC – Matt Christie

Please reach out to Contractor Support at 1-800-284-9069 with any questions

Comfort Home NYHEP Introduction and Training Session

Program/s: Comfort Home 
To: Participating Contractors 
Summary: Comfort Home NYHEP Introduction and Training Session 
Contact with Questions: Please contact Contractor Support with any questions on how to register for upcoming events.

NYSERDA is hosting a series of Comfort Home training courses for Participating Contractors as the Program is migrating to the NYHEP Portal. Please see the scheduled dates below. Recordings of the training will be available on the Contractor Support website and the Comfort Home SharePoint after the training.

Scheduled Dates:

Tuesday, April 29th at 10AM – 11AM EST (Register here)

Thursday, May 1st at 2PM – 3PM EST (Register here)

Tuesday, May 6th at 10AM – 11AM EST (Register here)

Thursday, May 8th at 2PM – 3PM EST (Register here)

NYSERDA Participating Contractor Heat Pump Training Series II

Events, Training Opportunities and ConferencesArchive
EmPower+Archive
Residential Energy AssessmentsArchive
Comfort Home PilotArchive
Green Jobs – Green New York Residential FinancingArchive
General AnnouncementsArchive

Program/s: EmPower+, Residential Energy Assessments, Comfort Home
To: Participating Contractors
Summary: NYSERDA Participating Contractor Heat Pump Training Series II
Contact with Questions: max.ciovacco@nyserda.ny.gov

NYSERDA Heat Pump Training Series 
Fridays 8:00 a.m. – 9:00 a.m. ET 
To register for the series, please click here.

DateTopicPresenter
03/14/25 
Manual J – Overview, including inputs & data gathering 
-Take offs 		Matt Christie/TRC+ 
03/28/25 Equipment Selection/ Manual D & S (NEEP tool) 
-Determine design heating capacity, select equipment 
-Avoiding oversizing 
-When/how to use supplemental systems- guidelines of minimum size 		NYSERDA/Max Ciovacco or TRC – Manual D 
04/11/25 Over-sizing, Over-zoning, under-sizing with back up heat (5kw up to 20% of heating load) SWA – Robb Aldrich 
04/25/25   Design and placement of the system, Value engineering principles and practices TRC – Matt Christie 
05/09/25 Office Hours/feedback TRC – JJ Sawicki 
05/23/25 Ancillary/Miscellaneous –  
Exterior Equipment Placement 
Snow shields 
Condensate lines 
Dehumidification 
Avoiding mold growth in heads 
Manufacturer commissioning checklist 		TRC – Chrissy Thisse 
06/13/25 Using Manual J in Design- Putting it all together TRC – TBD

NYSERDA Single Family Programs Update – 10/4/2024

Events, Training Opportunities and ConferencesArchive
EmPower+Archive
Residential Energy AssessmentsArchive
Comfort Home PilotArchive
Green Jobs – Green New York Residential FinancingArchive
General AnnouncementsArchive

Program/s: EmPower+, Residential Energy Assessments, Comfort Home
To: Participating Contractors
Summary: Monthly Contractor Update
Contact with Questions: Empower.residential@nyserda.ny.gov

NYSERDA Single Family Programs Update
Friday, October 4, 2024
8:30 a.m. – 10:00 a.m. ET
Webinar number: 2534 351 3591
Event password: Energy 1

All attendees must register prior to joining the event. This process will allow you to add the meeting to your calendar and provides each individual with a custom link to join the meeting. Please do not share your link with anyone. To register, please click here.

All webinars are recorded and links to the recordings are available on the Contractor Support site.